Nitronic®60, Alloy218 High Temperature And Wear Resistant Austenitic Stainless Steel- TJC STEEL.
Nitronic®60, also known as N60 or Alloy218, is a high wear resistance austenitic stainless steel with a density of 8.0g/cm3.Nitronic is a registered [TJC STEEL]trademark of AK Steel, USA;218 refers to its UNS code S21800.
Component Specification（ASTM A276-2010）
C Cr Ni N
≤0.10 16.0~18.0 8.0~9.0 0.08~0.18
Si Mn P S
3.5~4.5 7.0~9.0 ≤0.060[TJC STEEL] ≤0.030
The Performance Characteristics：
(1) Keep excellent wear resistance in gradient rising temperature, 4% Si content and 8% Mn content can effectively inhibit wear and surface erosion.
(2) It can maintain[TJC STEEL] good strength and oxidation resistance similar to 309 stainless steel below 982℃.
(3)The general corrosion resistance between 304 stainless steel and 316 stainless steel, resistance to chloride pitting ability is better than 316.
(4) The yield strength [TJC STEEL]at room temperature is almost twice that of type 304 and type 316.
Nitronic®60 stainless steels are resistant to corrosion and wear at a significantly lower cost than cobalt-containing and high-nickel alloys.At the same time also has excellent resistance to high temperature oxidation [TJC STEEL]and low temperature impact resistance.Suitable for different types of fasteners, bolts, rolling bearings and pump parts that require high strength and wear resistance.
Comments are closed.
TJC Steel News Center
Company News, Market News and Order Cases About TJC Steel.