​In the realm of stainless steel, JIS G4304 SUS316Ti hot-rolled plates and coils stand out for their exceptional performance and durability. These materials, manufactured under the strict guidelines of the Japanese Industrial Standards (JIS), exhibit superior chemical and mechanical properties that are tailored to meet the demands of various industrial applications.
Chemical Composition
SUS316Ti is a chromium-nickel-molybdenum austenitic stainless steel with the addition of titanium. The chemical composition of SUS316Ti includes:
 Carbon (C): ≤ 0.08%
 Silicon (Si): ≤ 1.00%
 Manganese (Mn): ≤ 2.00%
 Phosphorus (P): ≤ 0.045%
 Sulphur (S): ≤ 0.030%
 Chromium (Cr): 16.00-18.00%
 Nickel (Ni): 10.00-14.00%
 Molybdenum (Mo): 2.00-3.00%
 Titanium (Ti): 5C-0.70%
The addition of titanium stabilizes the carbon in the steel, enhancing its resistance to intergranular corrosion. The chromium content provides excellent corrosion resistance, while the nickel addition improves strength and high-temperature performance. The molybdenum further enhances corrosion resistance, and the titanium improves heat and oxidation resistance.
Mechanical Properties
SUS316Ti hot-rolled stainless steel plates and coils exhibit remarkable mechanical properties. The yield strength is typically ≥ 205 MPa, while the tensile strength is ≥ 515 MPa. The elongation rate is ≥ 35%, indicating good ductility. The hardness is typically ≤ 187 HB, and the impact toughness is ≥ 100 J, demonstrating its ability to absorb energy under impact loads.
Heat Treatment
SUS316Ti stainless steel plates and coils are typically supplied in a solution heat-treated condition. This treatment ensures a uniform microstructure and optimal mechanical properties.
Dimensional Range
The dimensions of SUS316Ti hot-rolled stainless steel plates and coils vary depending on the specific application. Common plate thicknesses range from 0.3mm to 100mm, with widths of 1000mm to 2000mm and lengths of 2000mm to 6000mm. Coils are also available in a variety of diameters and widths to suit different requirements.
Impact Testing
SUS316Ti stainless steel undergoes rigorous impact testing to ensure its reliability and durability. The high impact toughness of this material makes it suitable for applications where impact loads are a concern.
Primary Applications
SUS316Ti hot-rolled stainless steel plates and coils find applications in a wide range of industries, including:
 Chemical processing
 Petrochemicals
 Marine environments
 Power generation
 Food processing
These applications require materials that can withstand corrosive environments, high temperatures, and mechanical stress. The excellent corrosion resistance, strength, and ductility of SUS316Ti make it a preferred choice for such applications.
TJC Steel Group Supply Cases
At TJC Steel Group, we have a rich history of supplying JIS G4304 SUS316Ti hot-rolled stainless steel plates and coils to various industries. Our products have been used in chemical plants, oil refineries, offshore drilling platforms, and more. Our customers appreciate our commitment to quality, reliability, and timely delivery.
In conclusion, JIS G4304 SUS316Ti hot-rolled stainless steel plates and coils offer exceptional performance and durability, making them an ideal choice for a wide range of applications. With our extensive experience and expertise in supplying these materials, TJC Steel Group is your trusted partner for all your stainless steel needs.

​TJC Steel Group is proud to introduce our high-quality JIS G4304 SUS316LN hot-rolled stainless steel plate and coil products. This material, renowned for its excellent corrosion resistance and mechanical properties, finds extensive applications across various industries.
Chemical Composition
SUS316LN stainless steel is primarily composed of chromium, nickel, and molybdenum, with small additions of titanium and niobium to further enhance its corrosion resistance and mechanical performance. The chemical composition specifications are as follows: Carbon (C) ≤ 0.03%, Silicon (Si) ≤ 1.00%, Manganese (Mn) ≤ 2.00%, Phosphorus (P) ≤ 0.045%, Sulphur (S) ≤ 0.030%, Chromium (Cr) 16.50-18.50%, Molybdenum (Mo) 2.00-3.00%, Nickel (Ni) 10.50-14.50%, and Nitrogen (N) 0.12-0.22%.
Mechanical Properties
The mechanical properties of SUS316LN stainless steel are noteworthy, making it a reliable choice for demanding applications. Its tensile strength, yield strength, and elongation properties are all carefully controlled to meet international standards.
Heat Treatment Status
Our SUS316LN hot-rolled stainless steel plate and coil products undergo strict heat treatment processes to ensure their optimal mechanical and corrosion resistance properties. The heat treatment status is carefully monitored and documented to guarantee consistency and reliability.
Size Range
We offer SUS316LN stainless steel plate and coil in a wide range of sizes to meet your specific requirements. The plate thickness ranges from 0.5mm to 80mm, with lengths up to 6 meters and widths up to 3 meters. The coil specifications include outer diameters from 6mm to 530mm, wall thicknesses from 0.5mm to 50mm, and lengths up to 12 meters.
Impact Testing
To ensure the robustness and durability of our SUS316LN stainless steel products, we conduct rigorous impact testing. These tests evaluate the material's ability to withstand sudden and severe loads, providing valuable insights into its performance in demanding environments.
Main Application Scenarios
SUS316LN stainless steel finds widespread applications in various industries due to its exceptional corrosion resistance and mechanical properties. It is commonly used in aerospace, power generation, petrochemical, shipbuilding, machinery, electronics, and environmental protection sectors.
TJC Steel Group Supply Cases
As a leading supplier of stainless steel products, TJC Steel Group has successfully delivered numerous SUS316LN hot-rolled stainless steel plate and coil projects to satisfied customers around the world. Our experienced team and advanced production facilities ensure timely delivery of high-quality products, tailored to specific customer requirements.
In conclusion, TJC Steel Group's JIS G4304 SUS316LN hot-rolled stainless steel plate and coil products are the ideal choice for demanding applications requiring exceptional corrosion resistance and mechanical properties. Our commitment to quality and customer satisfaction sets us apart as a trusted supplier in the global stainless steel market.

​JIS G4304 SUS316L hot-rolled stainless steel plates and coils are renowned for their superior corrosion resistance and durability. These materials are specifically designed to meet the stringent demands of various industries, where high-performance materials are paramount.
Chemical Composition
The SUS316L stainless steel is composed of the following chemical elements: Carbon (C) ≤ 0.03%, Silicon (Si) ≤ 1.00%, Manganese (Mn) ≤ 2.00%, Phosphorus (P) ≤ 0.040%, Sulphur (S) ≤ 0.030%, Chromium (Cr) 16.00-18.00%, Molybdenum (Mo) 2.00-3.00%, and Nickel (Ni) 12.00-15.00%. This specific composition ensures the steel's excellent corrosion resistance, especially against chloride ions.
Mechanical Properties
In the solution heat-treated condition, SUS316L stainless steel exhibits exceptional mechanical properties. It has a hardness of HB 187 or below, a tensile strength of 480 N/mm² or above, a yield strength of 175 N/mm² or above, and an elongation of 40% or more. These properties ensure the steel's durability and resilience under various operating conditions.
Heat Treatment Condition
JIS G4304 SUS316L hot-rolled stainless steel plates and coils are subjected to a solution heat treatment process. This treatment involves heating the steel to a specific temperature, followed by cooling, to achieve a homogeneous microstructure and optimal mechanical properties.
Dimensional Range
The SUS316L hot-rolled stainless steel plates and coils are available in a wide range of thicknesses, from 0.5mm to 35mm, and in various widths and lengths to meet specific project requirements. The steel can also be custom-cut to fit specific dimensions.
Impact Testing
JIS G4304 SUS316L stainless steel undergoes rigorous impact testing to ensure its structural integrity and toughness. This testing involves subjecting the steel to a sudden impact force to assess its ability to resist fracture.
Main Applications
The corrosion-resistant nature and superior mechanical properties of SUS316L stainless steel make it ideal for a wide range of applications. It is commonly used in chemical processing equipment, marine environments, paper and pulp industries, and food processing facilities. The steel's ability to withstand chloride corrosion is particularly valuable in coastal and marine applications.
TJC Steel Group Supply Cases
TJC Steel Group has a long-standing reputation for supplying high-quality JIS G4304 SUS316L hot-rolled stainless steel plates and coils. Our products have been successfully utilized in numerous projects across various industries, including chemical plants, offshore oil and gas facilities, and paper mills. Our customers appreciate our commitment to quality, timely delivery, and competitive pricing.
In conclusion, JIS G4304 SUS316L hot-rolled stainless steel plates and coils offer unparalleled corrosion resistance, excellent mechanical properties, and wide application possibilities. With TJC Steel Group as your trusted supplier, you can ensure the success of your project with high-performance materials that meet your exact specifications.

​The A515 Grade 70 steel plate, also known as A515Gr.70 or A515Gr70, is a premium grade of steel designed specifically for use in the construction of pressure vessels and boilers. This steel plate, conforming to the ASTM A515/A515M standard, offers exceptional performance in terms of strength, toughness, weldability, and corrosion resistance.
Chemical Composition
The chemical composition of A515 Grade 70 steel plate is carefully controlled to ensure optimal mechanical properties. The key elements in its composition include carbon (C) at ≤0.30%, manganese (Mn) ranging from 0.79-1.30%, silicon (Si) between 0.13-0.45%, phosphorus (P) and sulfur (S) both at ≤0.035%. These chemical constituents ensure that the steel plate exhibits exceptional tensile and yield strength.
Mechanical Properties
The A515 Grade 70 steel plate boasts impressive mechanical properties. It has a minimum tensile strength of 485 MPa and a minimum yield strength of 265 MPa. The steel plate also exhibits excellent ductility, with a good elongation rate. Its combination of high strength and ductility makes it suitable for applications that require both.
Heat Treatment
The A515 Grade 70 steel plate is typically supplied in a normalized condition, which ensures its mechanical properties are uniform and consistent. For thicker plates, additional heat treatments such as quenching and tempering may be applied to further enhance its performance.
Size Range
The A515 Grade 70 steel plate is available in a wide range of sizes to meet the varying needs of customers. It is commonly available in thicknesses ranging from 8 to 200 mm, with widths and lengths tailored to specific requirements.
Impact Testing
To ensure the reliability and safety of the A515 Grade 70 steel plate in applications where it is exposed to low-temperature conditions, impact testing is often performed. This testing simulates the effect of impact forces at sub-zero temperatures to ensure the steel plate maintains its structural integrity.
Main Application Scenarios
The A515 Grade 70 steel plate finds widespread application in various industries. In the petrochemical industry, it is used to construct reactors, heat exchangers, and other equipment that operate under high pressure and temperature conditions. It is also commonly used in the construction of pressure vessels and boilers in power plants, where its high strength and corrosion resistance are essential. Additionally, its excellent weldability makes it a popular choice for nuclear power plants and aerospace applications.
TJC Steel Group Supply Case
At TJC Steel Group, we have a robust supply chain and extensive experience in supplying A515 Grade 70 steel plate to various industries. We have successfully delivered this steel plate to numerous customers for use in pressure vessels, boilers, and other critical applications. Our stringent quality control procedures and experienced team ensure that the steel plate meets or exceeds industry standards and customer requirements.

The A516 Grade 60 steel plate, also known as A516Gr.60 or A516Gr60, is a premium quality carbon steel plate specifically designed for use in pressure vessels and boilers. Its unique chemical composition and mechanical properties ensure its suitability for a wide range of demanding applications.
Chemical Composition:
The A516 Grade 60 steel plate is a low-alloy high-strength steel with a balanced chemical composition. The carbon content is typically below 0.2%, while silicon ranges from 0.3% to 0.7%, and manganese content is between 0.7% and 1.5%. Phosphorus and sulfur content are kept low, not exceeding 0.04% and 0.03% respectively. This optimized composition provides excellent mechanical properties and corrosion resistance.
Mechanical Properties:
The A516 Grade 60 steel plate exhibits exceptional mechanical properties. It has a yield strength of approximately 415 MPa (60 ksi) and a tensile strength ranging from 485 to 620 MPa (70-90 ksi). The plate also boasts an elongation of over 20% and maintains good performance even at temperatures down to -46°C. Its robust mechanical properties are further enhanced by its resistance to hydrogen-induced cracking (HIC) and sulfide stress corrosion cracking (SSCC).
Heat Treatment Status:
The heat treatment of A516 Grade 60 steel plates depends on their thickness. Plates with a thickness of 40mm or less are typically supplied in a hot-rolled condition, although they can also be normalized or stress-relieved if required. For plates thicker than 40mm, normalization is mandatory. Additionally, if a notch toughness test is specified for thinner plates, they must also undergo normalization.
Size Range:
The A516 Grade 60 steel plate is available in a wide range of sizes to meet various application needs. The dimensions, shapes, and weight tolerances of the plates adhere strictly to international standards, ensuring consistency and reliability. The plate thickness can be customized based on specific requirements, and the theoretical weight is calculated using a density of 7.85g/cm³.
Impact Testing:
The A516 Grade 60 steel plate undergoes rigorous impact testing to ensure its resilience and toughness. This testing involves subjecting the plate to sudden, high-energy impacts to assess its ability to withstand shock loads without fracturing or breaking. The plate's excellent impact resistance ensures its suitability for applications where sudden impacts or pressure changes are common.
Primary Applications:
The A516 Grade 60 steel plate finds extensive application in the petroleum, chemical, power generation, and boiler industries. It is commonly used to construct reactors, heat exchangers, separators, spherical tanks, gas tanks, liquefied gas tanks, nuclear reactor pressure shells, boiler drums, and other critical equipment. Its superior mechanical properties and corrosion resistance make it a reliable choice for these demanding applications.
TJC Steel Group Supply Cases:
At TJC Steel Group, we have a proud history of supplying A516 Grade 60 steel plates to various industries. Our clients include leading manufacturers of petrochemical equipment, power plants, and boilers who rely on our products for their critical applications. We have successfully delivered numerous projects, meeting stringent quality standards and delivery deadlines. Our ability to customize solutions based on specific requirements has earned us a reputation for excellence in the industry.
In conclusion, the A516 Grade 60 steel plate is a versatile material with excellent mechanical properties and corrosion resistance. Its suitability for a wide range of applications in demanding environments makes it a preferred choice for manufacturers in various industries. At TJC Steel Group, we are committed to providing our clients with the highest quality A516 Grade 60 steel plates to meet their specific needs.

​TJC Steel Group is proud to introduce our range of A269 TP347 stainless steel seamless and welded pipes, which are designed to meet the rigorous demands of various industrial applications. This material offers exceptional properties that make it a preferred choice for a wide range of uses.
Chemical Composition:
The A269 TP347 stainless steel pipes are composed of carefully balanced chemical elements that contribute to their superior performance. The key components include Carbon (C) ≤ 0.08%, Silicon (Si) ≤ 1.00%, Manganese (Mn) ≤ 2.00%, Phosphorus (P) ≤ 0.045%, Sulphur (S) ≤ 0.030%, Chromium (Cr) 17.00-19.00%, Nickel (Ni) 9.00-12.00%, and Niobium (Nb) ≥ 10%C ≤ 1.00%. This composition ensures high corrosion resistance, heat tolerance, and excellent strength.
Mechanical Properties:
Our A269 TP347 pipes exhibit remarkable mechanical properties, including high yield strength and tensile strength. At 20°C, the yield strength is ≥ 205 MPa, while the tensile strength is ≥ 520 MPa. The pipes also possess good ductility, with an elongation rate of ≥ 35%. These properties ensure durability and reliability in demanding environments.
Heat Treatment Status:
The A269 TP347 stainless steel pipes undergo a stabilization heat treatment process. This involves heating the material to a temperature between 900°C and 1100°C, followed by a controlled cooling process. This treatment eliminates the risk of intergranular corrosion and improves the corrosion resistance of the pipes.
Size Range:
We offer A269 TP347 stainless steel pipes in a wide range of sizes to cater to various applications. The pipes are available in diameters ranging from small to large, with wall thicknesses suitable for different pressure and temperature requirements.
Impact Testing:
To ensure the pipes' ability to withstand sudden impacts, we conduct rigorous impact testing. These tests simulate the effects of sudden impacts and verify the pipes' structural integrity and toughness.
Main Application Scenarios:
A269 TP347 stainless steel pipes are widely used in applications that require high corrosion resistance and heat tolerance. They are commonly found in the aerospace industry, petrochemical plants, food processing facilities, and paper manufacturing plants. Their excellent performance in harsh environments makes them a reliable choice for critical applications.
TJC Steel Group Supply Cases:
TJC Steel Group has a proven track record of supplying A269 TP347 stainless steel pipes to various industries. We have successfully delivered projects to renowned companies in the aerospace, oil and gas, and chemical sectors. Our clients appreciate our commitment to quality, timely delivery, and customer service.
In conclusion, A269 TP347 stainless steel seamless and welded pipes from TJC Steel Group offer exceptional performance and reliability. Their balanced chemical composition, superior mechanical properties, and heat treatment status make them a preferred choice for demanding industrial applications.

​TJC Steel Group is proud to introduce our premium range of A269 TP304L stainless steel seamless and welded pipes. These pipes are designed and manufactured to meet the highest industry standards, ensuring superior quality, durability, and reliability in various applications.
Chemical Composition:
The A269 TP304L stainless steel pipes are composed of specific alloy elements that impart exceptional properties. The chemical composition includes a chromium content ranging from 17.00% to 19.00%, nickel content between 8.00% and 12.00%, carbon content not exceeding 0.03%, and other trace elements such as silicon, manganese, phosphorus, and sulfur, all within stringent limits. This composition ensures excellent corrosion resistance and high-temperature performance.
Mechanical Properties:
Our A269 TP304L pipes possess superior mechanical properties, including high strength, plasticity, and toughness. These pipes are able to withstand significant loads and impacts, making them suitable for demanding applications.
Heat Treatment Status:
The A269 TP304L stainless steel pipes undergo rigorous heat treatment processes to achieve optimal material properties. The solid solution treatment involves heating the pipes to temperatures ranging from 1080°C to 1100°C, followed by cooling via water or air quenching. Intermediate annealing steps during cold working are also employed, typically at temperatures of around 800-900°C, to relieve internal stresses and maintain material integrity.
Size Range:
The A269 TP304L stainless steel pipes are available in a wide range of sizes to meet various application requirements. The pipes have outer diameters ranging from 6 mm to 38 mm and wall thicknesses from 0.7 mm to 6 mm. Additionally, the pipes can be supplied in lengths up to 25 meters, ensuring flexibility in installation and usage.
Impact Testing:
To ensure the pipes' resilience and ability to withstand sudden impacts, they undergo stringent impact testing procedures. This includes low-temperature impact testing, where samples of the pipe material are tested at specific low temperatures to assess their ductility and toughness under extreme conditions. The results of these tests provide crucial information about the pipe's performance in critical applications.
Key Applications:
The A269 TP304L stainless steel seamless and welded pipes find widespread application across various industries. Their excellent corrosion resistance and high-temperature performance make them suitable for use in chemical processing, food and beverage manufacturing, pharmaceutical production, and other demanding environments. Additionally, their strength and durability enable their usage in structural applications, such as in construction and mechanical engineering.
TJC Steel Group Supply Case:
TJC Steel Group has a proven track record of supplying A269 TP304L stainless steel seamless and welded pipes to numerous satisfied customers worldwide. Our pipes have been successfully utilized in various projects, including those in the energy, chemical, and food processing industries. Our customers appreciate our commitment to quality, timely delivery, and customer support, making TJC Steel Group their preferred supplier for stainless steel pipe solutions.

A269 TP316 stainless steel seamless and welded tubing is a highly sought-after material in various industries due to its exceptional properties. This article delves into the chemical composition, mechanical properties, heat treatment status, dimensional range, impact testing, primary applications, and relevant supply cases from TJC Steel Group.
Chemical Composition
The A269 TP316 stainless steel tubing boasts a well-balanced chemical composition that ensures its durability and corrosion resistance. The key elements include carbon (C) ≤ 0.08%, silicon (Si) ≤ 1.00%, manganese (Mn) ≤ 2.00%, sulfur (S) ≤ 0.030%, phosphorus (P) ≤ 0.035%, chromium (Cr) 16.00-18.50%, nickel (Ni) 10.00-14.00%, and molybdenum (Mo) 2.00-3.00%. This composition provides the tubing with superior corrosion resistance against acids, alkalis, salts, and other chemicals.
Mechanical Properties
The A269 TP316 tubing exhibits excellent mechanical properties, including a tensile strength of 520 MPa, yield strength of 205 MPa, elongation of 40%, and reduction of area of 60%. Its hardness ranges from ≤187HB to ≤200HV, ensuring durability and resilience.
Heat Treatment Status
The heat treatment of A269 TP316 stainless steel tubing involves solid solution treatment at 1010-1150°C followed by rapid cooling. This process optimizes the microstructure and enhances the corrosion resistance of the tubing.
Dimensional Range
TJC Steel Group offers A269 TP316 stainless steel tubing in a wide range of sizes, catering to various applications. The dimensional range covers diameters from 6mm to 630mm, meeting the requirements of diverse industries.
Impact Testing
The A269 TP316 tubing undergoes rigorous impact testing to ensure its toughness and ability to withstand sudden loads. This testing ensures the safety and reliability of the tubing in critical applications.
Primary Applications
The A269 TP316 stainless steel tubing finds widespread applications in industries such as petrochemical, chemical processing, pharmaceutical, and food processing. Its superior corrosion resistance and mechanical properties make it ideal for handling corrosive media in pipelines, heat exchangers, and other equipment.
TJC Steel Group Supply Cases
TJC Steel Group has a proven track record of supplying A269 TP316 stainless steel tubing to various industries. Some notable supply cases include providing tubing for a petrochemical plant's oil and gas pipelines, chemical reactors, and heat exchangers. The group's commitment to quality and timely delivery has earned it the trust of its clients.
In conclusion, A269 TP316 stainless steel seamless and welded tubing is a reliable material choice for demanding applications. Its excellent chemical composition, mechanical properties, and heat treatment status make it stand out among its peers. With a wide range of sizes and proven performance in various industries, A269 TP316 tubing is a preferred choice for many.