Nitronic 50 is a high strength corrosion resistant austenitic stainless steel with a density of 7.88g/cm3.Nitronic is a trademark of [TJC STEEL]AK Steel, USA.
ASTM F1314 S20910，XM-19
ASTM A351[TJC STEEL]
ASTM A743 CG6MMN，J93790
AK STEEL Nitronic® 50
GRADE S20910 J93790
C ≤0.06 ≤0.06
Si ≤1.00 ≤1.00
Mn 4.0~6.0 4.0~6.0
P ≤0.045 ≤0.040
S ≤0.030[TJC STEEL] ≤0.030
Ni 11.5~13.5 11.5~13.5
Cr 20.5~23.5 20.5~23.5
Mo 1.5~3.0 1.5~3.0
V 0.1~0.3 0.1~0.3
Nb 0.1~0.3 0.1~0.3
N 0.2~0.4 0.2~0.4
The Performance Characteristics Of：
(1)The corrosion resistance is better than 316L and 317L stainless steel. It can be exposed to the Marine atmosphere for a long time. In the quiet sea water environment, the corrosion resistance performance is slightly better than [TJC STEEL]Monel 400 alloy.
(2) double the tensile strength of 304 and 316 stainless steel.
(3) It is affected by stress corrosion cracking in hot chloride environment, and its cracking resistance is between [TJC STEEL]304 and 316.
(4)It still maintains excellent mechanical properties at 629℃.
(5)Good mechanical properties at low temperature, very low permeability.
Nitronic 50 has both high corrosion resistance and high strength. It is a highly efficient alloy for petroleum, [TJC STEEL]chemical, fertilizer, nuclear fuel recovery, pulp and paper making, textile, food processing, Marine and other industries. Typical applications include: sea pump shaft, heat exchanger, pressure vessel, Marine engineering hardware, etc.
Comments are closed.
TJC Steel News Center
Company News, Market News and Order Cases About TJC Steel.