Y1Cr13, 416, SUS 416, 1.4005 Martensitic Free Cutting Stainless Steel is martensitic free cutting [TJC STEEL]stainless steel. Sulfur is added to the 410 stainless steel for free cutting.
STANDARDS: CHINA GB/T 20878-2007 Y12Cr13 OLD NAME Y1Cr13 AMERICA ASTM A582-05 S41600 416 JAPAN JIS G 4303:2005 SUS 416 GERMANY DIN EN 10088-3:1995[TJC STEEL] X12CrS13 1.4005 Chemical Composition(%) GRADE Y12Cr13 416 SUS416 1.4005 C ≤0.15 ≤0.15 ≤0.15 0.08~0.15 Si ≤1.00 ≤1.00 ≤1.00 ≤1.00 Mn ≤1.25 ≤1.25 ≤1.25 ≤1.50 P ≤0.060 ≤0.060 ≤0.060 ≤0.040 S ≥0.15 ≥0.15 ≥0.15 0.15~0.35 Cr 12.0~14.0 12.0~14.0[TJC STEEL] 12.0~14.0 12.0~14.0 Ni (≤0.60) -- (≤0.60) -- Mo (≤0.60) -- (≤0.60) ≤0.60 Physical Property Density(g/cm3)20℃ 7.78 Melting Point(℃) 1482~1532 Specific Heat Capacity [kJ/(kg·K)] 0~100℃ 0.46 Heat Conductivity [W/(m·K)] 100℃ 25.0 500℃[TJC STEEL] Coefficient Of Linear Expansion(10-6/K) 0~100℃ 9.9 0~500℃ 11.5 Specific Resistance(Ω·mm2/m)20℃ 0.57 Longitudinal Modulus of Elasticity(kN/mm2)20℃ 200 Magnetism Y Material Characteristics The cutting performance is about 85% of the easy cutting carbon steel, the best in all stainless steels. ② Corrosion resistance is lower than 410;High [TJC STEEL]resistance to typical atmospheric conditions, maximum corrosion resistance through hardening and polishing. Good hardenability, can be heat treated to HRC40;Higher hardness can be achieved by nitriding. ④ The sulfur content is high, and high temperature is not recommended. ⑤ It is not recommended to use below zero. Applications 416 stainless steel is usually used for parts that require heavy machining and require 13% chromium corrosion resistance, such [TJC STEEL]as motors, nuts and bolts, pumps, valves, automatic screw machine parts, washing machine assemblies, studs, gears, etc.Excellent cutting performance is the main reason for choosing this steel. Comments are closed.
|
TJC Steel News Center
Company News, Market News and Order Cases About TJC Steel. Archives
December 2024
Categories |